Written Instructions and Final Assembly


Tools

X-Acto Knife
Paper glue
Sissors
Ruler
Black Marker
Aluminum Foil  (for pipes)
Or Other Colored Foil  (for pipes)
Plastic Flexi Straws (for pipes)
6x Plastic Q-tips (for pipes)

Some pictures of the completed model are included, but the quality of the pics are as good as they get for now.  Hope they help with the construction.

------------------------

Follow the pistures included with the numbered parts and this should give you a good indication of what and where to put the pieces that you cut out.

Some parts of the tower are not visible in the picture supplied but these parts are easily put together.  Each page of the part sheets are numbered for easy reference.  All can be located on the part sheet included with these sheets.

Some general reference or description may be found on the part sheets.  Arrows generally indicate a FOLDED part and sometimes the arrows will indicate where the part is on the sheet for easy reference.

Some additional part of the tower and its base are made of other material and are those mentioned in the tools list.  They include all the pipes that will finish the tower.  These pipes are made of plastic “flexy” straws that you get from a child’s boxed fruit drink others are just larger straws and then you can use the Q-tip plastic stick, cut it and use them for the smaller pipes.  To add them to the tower please refer to the instruction pages included and do your best to add them where the design indicate with the grey circles on the parts of the base.  These are your indicators where to put the pipes.

Black thread is used too.  It is added to the finished model and are seen on the tower.  See page 2 of the instructions picture to see where they go.  They are indicated by the number TH-1, and TH-2 on the parts sheet.

At the end of the red pole on the top of the tower, use the end of a Q-tip, the fussy part to add to the top of this pole it finishes the pole off and allows for greater detailing.  Fencing was added to the model and this is an optional part that does not need to be added.  Add it only if you desire.

The large building at the base of the tower is simply just that, the main part of the base onto which the upper part of the tower sits on, eventually it will also hold the crawler and the rocket.  The secondary smaller buildings go underneath this top part of the tower base.  See the instruction page to see its location and how to glue it together.

The model has 2 main components the upper tower and the base of the tower.  The Ariane 4 rocket is a 1/96 scale model and you can download it at: 

The crawler for this tower and rocket will be coming soon.  Keep visiting the site for more information.  THIS MODEL IS FOR PRIVATE USE ONLY.  For commercial use please contact me at:  paper_heaven@hotmail.com


--------------------------
Date: 1:48 AM 9/15/2005